The tips for wood flooring crackings

At present, for the new house decoration, many people choose real wood flooring, and hardwood flooring prices are a little higher. Therefore, once any quality problems of the wood flooring occurs, it would be really frustrating. the most common problem of wood flooring is the floor cracking, which is determined by the characteristics of the wood flooring itself.Once you have installed and used the flooring properly, even when the flooring is fully qualified product, this quality problem may also occur. So the flooring maintenance is very important.

Duiring wooden floors maintenance, we should be sure to keep the floor dry and clean. Usually, flooring moisture content remains 8~12% and for such wood flooring under normal circumstances, there would be no problem.

But improper installation and usage also will cause wood floor quality problem, such as no waterproof process when installing; cleaning with water pouring or wiping with soap water or alkali water (these actions will damage the gloss of the lacquer); no isolation between bathroom and living room(or bedroom) ; no close the curtains in summer ,then the direct strong sunshine  makes the wooden floors cracking; too low temperature setting for the air conditioner , causing huge temperature change day and night, resulting in the violent expansion or contraction and  deformation cracking for the hardwood flooring.

After the hardwood flooring is installed, if any flooring boards are found cupping up, we should at once take up these flooring boards and remove the old glue and ash, use new glue and press closely; if some flooring boards’s lacquer damaged or falling down, we could use  No. 400 sandpaper dipped with SOAP water for polishing, and then clean these floor boards, make the finishing or lacquer after painting these boards, finally polish with wax again 24 hours later drying. Waxing the wood flooring once time every month is one of the best ways of maintenance, but make sure that clean the moisture and stains on the flooring before waxing.

The method of installing the wood flooring on under heating system

The environment of under floor heating system is very complex, requiring a high thermal conductivity and dimensional stability of the wood flooring. To ensure a better heat conduction and avoid flooring deformation , the thickness should not be more than 8mm for laminate flooring And the other floorings with thickness more than 8mm, such as hardwood flooring, Bamboo flooring, engineered wood flooring and laminate flooring are not suitable for under heating system for the occasion.

Requirements before installation

1. Before the installation, the under heating system must be tested for the heating water, with the water temperature at least 50 degrees centigrade, and the underfloor heating system is working properly, and the system keeps the water temperature more than 12 hours. Makre sure that there is no leakage before installing the wood flooring on the system. 　　

2 The construction method of destroying the ground surface is not allowed, as this kind of method will undermine the cooling coil of the heating system　

3 If the construction is at winter in cold areas, the wood flooring should be kept with open boxed in the field for more than 12 hours in advance, to make the flooring adapt to variations in temperature to avoid the deformation of flooring boards. 　　

4 Before installation, the ground surface should be checked wither it is flat, dry, clean. Make sure the doors and windows are complete, there is no leaking from relevant facilities. In the end, pls check the distance between the door and the ground is enough or not 　　

5 Lay the Special underlayer neatly on the ground, and seal the joints of the underlayers with adhesive tape.

6 Regarding the laying direction of the flooring, the direction of the long-side flooring board  should be consistent with the room lighting. During installation, the grooves of the long-side floor in the first row should be faced to the wall, with wood wedges between the floor and walls and  with a floor expansion gap about 8-12mm.The flooring boards should be staggered between rows and rows for installation and the dislocation distance should be more than 20 cm. 　　

7 When laying the flooring, pls pay great attention at all times to the height difference of the surface, cracks and other defects. Make sure the flooring boards laid are qualified before gluing the joints and immediately remove residual glue on board. 　　

8 No walking on the flooring within 12 hours after installation, other subcequent activities of construction should be carried out after 24 hours. 　　

9 if floor laying is longer than 8M, or at the joining between rooms , the  wood floorings shall be cut off to leave an expansion gap about 8-12mm, which needs a T profile as connection to reduce the floor arching. 　　

　　

Baseboard installation

When you install the wood skirting, the expansion joints should be covered. 　　

Attentions:

1 When decorating the house, we shall pay attention to the under floor heating system: no legless furniture to avoid wood flooring's local deformation caused by poor cooling. 　　

2 For the first operation of under heating system or the restarting after a long time, keep slowl heating speed (recommended heating rate is 1 c/h) to prevent heating up too fast which could cause cracking of the wood flooring and twisting. At the same time,  pls keep the floor dry.

3 when the indoor air is dry, indoor humidity should be adjusted.

What are the reasons for wood flooring aging

We believe that many people have encountered the problem of an aging wood flooring, because, as time goes on , wood flooring will be discolored, bulging, cracking, peeling, cupping, and mildewing, arching, degumming, worn, which we all name as the aging wood flooring. Then what are the reasons of wood flooring ageing?

There are two reasons of wood flooring aging: internal and external.

The internal reasons are including： the moisture content of wood flooring, the performance and quality of flooring lacquer, the wood material of flooring, the quality of moisture-proof underlayer installed when laying the floor, the gaps left for expoation and contraction during the installtion of flooring.These will affect the life time  and the aging of your hardwood flooring.

External factors mainly refer to the temperature of the wood floor, humidity, mold fungus causeing aging wooden flooring.

The most difficult problem for anti-aging flooring technology is at the aspect of flooring lacquer.

As the surface coatings of wood flooring with ordinary lacquer could not match those coatings of laminate flooring in terms of hardness, flexibility, scratch resistance and the abrasion resistance. Thus, there would be bumps, scratches and lacquer-sheddings for those ordinary wood floorings and this phenomena undoubtedly affects flooriing lifetime. 　　

The moisture content control, the moisture resistance ,the installation ways of hardwood flooring have great effects on the flooring aging. As a result, in normal situations, we should try to avoid the contact of hardwood flooring with water, this can significantly improve the lifetime of wooden flooring.At the same time, when purchasing flooring, we should also select the wood flooring with precise moisture control and good moisture resistance. 　　

During installation, we have to ask sellers to help us arrange installation, otherwise no one knows who shall take responsibility once problems occur.

To protect wood flooring from aging, it is necessary to cut off the source of wooden flooring,aging.The above information is what we must pay great attention to when buying the hardwood flooring.

3 steps to deal with soaked wood flooring

We never know when accidents happen.Although we take care of wood flooring all the time, there will be unexpectedly an accident on them in daily lives, such as you forgot to shut the window when a storm comes, or forgot to shut the faucet at home. which would make our wood flooring soaked.This is a nightmare to us as the soaked wood flooring will definitely break in a short time. If we take appropriate measures,there is still chances of bailing out these soaked wood flooring.

Remove soaked flooring immediately. If the wood floor is soaked in water, we should remove all the floors immediately. If it is hardwood flooring,we should ask those professionals to remove.Other floors such as laminate flooring, etc. you can take out the ( wood skirtings)baseboard and remove them by ourselvies.

After removal, the flooring need to be dried in a ventilated place, no exposure to sunshine, becauseexposure to sunshine causes rapid loss of moisture ,which leads to deformation of the floor. Then dry the ground and re-install the wood flooring. However,you’d better to ask a professional worker for installation, since the glue used in the past already does not work any more. Besides, the soaked wood flooring will perform very well, and definitely easily get deformed.If we maintain these soaked flooring with wax or oil, it will be much helpful to those wood floorings.

We need to take measures as soon as possible after the floor is soaked in water. if it is after 3 days, there is nothing we could do but get rid of the wood flooring. Above are the emergency measures you can take when  all of your wood flooring is soaked, if only a small area is wet with water, such as accidentally a pot of water poured on the floor, we just need to mop the flooring a few times, using a fan to dry can help.

If it is partial soaking damage, clean up the floor after a period of time to observe whether there are obvious changes.If there is a cupping of flooring, you can contact workers to do partial replacement, and calculate the floor space  which needs replacement. If there is remaining of the original flooring, we may require workers to use this floor to install. If there is no remaining, you may need to check the size and wood of your flooring for replacement, because only the floor with the same color and size will be applied, otherwise it is impossible to be installed with the wrong size or it will show great color difference. In the end, be sure to arrange installation of hardwood flooringuntill the ground is already dried.

How to make floor color collocate with overall decoration

Recently our customer Mr. Liu who is decorating his new house came to us for consulting: what factors should we consider to choose wood flooring colors? And at the same time, how to make flooring color collocate with overall decoration?

Based on MrLiu’s question about choosing wood flooring colors for his new home, we estimate that this might be a very common question which many people will come cross when they prepare for decoration of new houses.

We hope this article will help you and let you have your own solution to this common question.

The lighting conditions of the living room determines the range of wood flooring color. Rooms with good lighting conditions fit the floor colors in a wider range: deep color and light color are both available. In the low-story rooms, the natural lighting is not good then we should choose the suitable floor with higher brightness for the ground. If possible, consider the dark color as the last option for the low-story rooms with poor natural lighting.

Color affects people's visual sense: warm color is the color of expansion, cold color is the color of contraction, as a result, small room should choose the cool colors or simple bright floor to make people feel the space largened. If selecting the warm colorfor the wood floor, we will feel expressed as this color makes us feel the space more narrow.

In the choice of wood grain, People in Asian prefer the straright or small wood grains, avoiding the wood grain with large and waving patterns, which in fact is the favorite to the people from Europe and North America.

How to balance the floor color and overall home：

Nowadays, many families prefer to use white flooring, hoping to have a peaceful atmosphere at home. The popular light colors are gray (grey) and white, these colors give people the feeling of ease and peace.

The effectiveness and performance of the dark colors floor are very strong and these dark colors are of distinctive personality,for example red floor gives people a strong atractive feeling. If the walls are also painted with strong attravtive colors, it would look incongruous. Selecting the ivory color with pink tones for red flooring, would form a sense of unity in our eyes.

Some cusotmers collocate white walls with dark brown floors, this collocation will make the floors much darker. If the walls are in cashmere color similar the brown floor color, then colors of the walls and wood flooring are relatively close, the room looks much larger.

When choosing the hardwood flooring, we also need to pay attention to the collocation of flooring and furnitures. Flooring color should match the furniture color, in a calm, gentle tone.Because the ground decoration is the permanent decoration,usually the wood flooring would be changed often, thus choosing a neutral color is a very good idea

How to maintain wood floorings at a low cost?

I have seen on the magazines that coca cola can clean the toilet. It is poor in carbon and

environmental. It is really low in cost and great in wisdom. Today, let us talk about how to

maintain wood floorings at a low cost. People who have the desire to look attractive

know that milk can take good care of one’s skin. However, expired milk can not only

maintain skin, but also maintain hardwood floorings. Let’s see.

The milk we left or forget to drink today will go wrong the next day. If we throw it off, we

would feel pity. If we drink it, we would have stomach. Then, we should we do? In fact,

expired milk would turn to be acid, which will increase the lactic acid content in the milk. It

is natural eradicator that can help to clean the floors. Besides, the protein and fat

contained in the milk could form a protective tissue which can keep the wood floorings

bright enough and protect them from scratches. The fat in the milk can be rubbed on the

surface of wood floorings. It can also make use of the original luster of wood floorings so

that the floors would not easily fade and discolor. What’s more, the wood floorings would

not easily get deformation.

Then how to use the expired milk to maintain wood floorings? First, we can put the milk

into the plate, then add water twice as much as the milk to dilute it, dampen the rag and

wring it out. It is time to clean the floors. If we usually have expired milk, we can do it once 

a week. This can not only save cost, but also keep the hardwood flooring notable. It is

really a good method.

Information about formaldehyde release from wood flooring

Decorate home with wood flooring is now the choice of the vast majority of young people, and this is a fashion trend nowadays.But for wooden floors, formaldehyde issue is really a big problem, which annoys many people for the home decoation.Today we would like to share you with some information about formaldehyde in the aspect of wood flooring.

Formaldehyde superscale (excessive formaldehyde emssion),excessive Formaldehyde inhalation may result in severe irritation and edema, eye irritation respiratory tract, may also induce asthma. Headache, dizziness, weakness, nausea, vomiting, chest congestion, eye pain, throat pain, palpitations, insomnia, poor appetite, weight loss, and hypomnesis are minor wound, what is more, long-term inhalation of pregnant women may result in fetal malformations ,even fetal death. Men’s inhaling c Formaldehyde an cause male sperm abnormalities and death. 　　

Of course, don't be scared too much. In fact,formaldehyde content in a certain range will not harm our health, man's odor threshold is usually 0.06~0.07mg/m3 of formaldehyde content.First of all, let us have a look at the mandatory national standards of wood flooring. The emision limit of formaldehyde in the national standards of wood flooring(GB 18580-2001) : formaldehyde emission from hardwooden flooring must be less than or equal to 1.5mg/L, or E1 standard. Those qualified wood flooring with this formaldehyde emision, can be directly applied to the Interior decorations. To protect people’s health against formaldehyde, there are other higher starndard of the formaldehyde emsision around the world, which include European standards of E0 ≤ 0.5mg/L, and ther higher standards of F4 ≤ 0.3mg/L, Super F4 non-formaldehyde standard floor: 0.1mg/L

EI ≤ 1.5mg/L is the standard of desiccator method measurement. This desiccator method is as below: in certain temperature and humidity conditions , put 10 small pieces of wood flooring sample (150x50x15mm) into a container of 40 liters. At the bottom of the container,there is  a desiccator for measuring water level, the formaldehyde realese of wood flooring would be measured according to the formaldehyde dissolved in water.

There are another two methods of testing formaldehyde content-: the perforated-extraction method(≤ 9mg/100g), the climate Chamber method(≤ 0.12mg/m3).

Formaldehyde of wood flooring comes from the flooring adhesives,flooring production, and the flooring lacquer and painting. The major source is the glue used for wood flooring and laminate flooring in the production process. Because the wood flooring glue is made of the glurea-formaldehyde resins,which can emit formaldehyde. As a result, those wood floorings made with non-formaldehyde glue, could release formaldehyde content ≤ 0.1mg/L.

After having an understanding of formaldehyde release standards, we could ask the flooring suppliers which glue is used for the wood flooring and what is their standardards for the formaldehyde emision when you are buying wood flooring. Of course it is best for the suppliers to provide you with test certificates. 　　

It would not be a good idea for you to move in the new house at once after the wood flooring is installed. Open the windows to ventilate the new house and this will decrease the formaldehyde content in the air of your new house. PS: do not spray air fresheners, perfumes to try to cover up the smell of new decoration indoor. The chemicals in air fresheners reacting with harmful substances in the air, will cause secondary pollution, this will be more harmful to health.

Put in the house some greenery (Spider plant, sansevieria, Ivy, Aloe, Agave) to absorb formaldehyde.

With the above information, we hope you would have a beeter understanding of formaldehyde from hardwood flooring, and these information will help you build a green healthy home

How to choose hardwood flooring colors for home decoration

For home decoration, solid wood flooring colors match with the furniture and wall, this

will take home decoration effect to a higher level. If not, then indoor decorations will not

look harmonious. Decoration with solid wood flooring is based on the long term living, as a

result,the color of wood flooring needs to match the colors of the furniture. Before

decorating the new house with wood flooring and furnitures, we should pay attention to

three key principles as below:

 

First, the principle of the same color collocation

On the basis of the principle of the same color collocation, be sure of our desired decor style

to make our home simple and warm.In this casse, we could try to choose the solid wood

flooring with neutral or light color. If we want home with the elegant atmosphere, the solid

wood flooring with dark colors would be the best option.

 

Second, the principle of the similar color collocation

For small rooms or rooms with poor lighting conditions, when choosing solid wood flooring

we should take the similar colors as principal.This will expand people’s sense of space in

these small rooms and will not make people feel particularly cramped crowded. And with

good lighting conditions you can choose a lighter colored solid wood floors.

 

Third, the principle of contrasting color collocation

The furnitures light color can arbitrarily match the wood flooring with dark or light color.

We could consider the warm colored hardwood flooring in order to make rooms warm

and clean. If both furnitures and wood floorings are dark color,we need to be cautious to

avoid the negative and sad feeling. Here is some good suggestions to you : light wall,

neutral floor, dark furniture. If the color of the walls are  very shallow, flooring colors can

be neutral colors, furniture appropriately darker in color.

 

Nowadays the young people like modern or natural decoration style. When we choose the

wood flooring colors, the most popular wood floorings are oak, ash ,maple. As to the

decoration for elder people’s houses, we should note that the darker color or the color with

happy feeling is the best, such as Iroko, brazilian teak(cumaru) wood flooring.

Pay attention to five aspects on installation of hardwood flooring

Hardwood flooring feels very comfortable, looks naturally beautiful, but is expensive.

For consumers who have a solid wood flooring,it is very unconomical to bear the bad

influence its usage life due to the improper installation.

There are five aspects on wood flooring installation that should be paid attention to.

 

First, be sure to check after finished the installation of joist.

Uneven ground can suspend part of the floor and wooden joist, when you step on it you

might hear an unpleasant sound. If the wood flooring is not firmly installed , it can also

come across the same situation, thus make sure to check it after installation. You can step

on the wooden joist, or shake the feet to make sure whether it is firm.

 

Second, don’t forget flat testing

After the installation of first row of floors, the installer should test flatness, if the wood

flooring is uneven, we need to adjust immediately, otherwise it will affect the upcoming

laying work. After installation, you’d better put a vertical ruler on the floor, to see if there

are gaps.

 

Third, drying and decay of joist

Generally, the qualified wood flooring moisture content is 12%, wood joist need to be

dried in order to avoid dampness which is caused by moisture difference. Solid wood

flooring is easy to be damaged by worms, so put camphor wood shavings in the joist,

normally, put 1000 g camphor wood shavings every eight square meters.

 

Fourth, pay attention to the color contrast of wood flooring in advance

The color of each piece of wood flooring could be various, so it should be classed before

laying, pick out the similar color, and texture floor so that the overall effect will not be

much difference.

 

Five pay attention to the laying of underlayer foam

In order to avoid the water content of wall to affect wood floors, the laying of underlayer

foam should not only cover the entire wood joist, but also be sure that the underlayer foam

is 10cm away from the corners. Meanwhile, between the wall and the wood flooring

should stay out of the expansion joints, if it is too close, it may easy to distort

Flooring maintenance in winter: Humidification is the key

Cold winter is coming, thousands of families have turned on the underfloor heating, the

temperature of the wood flooring began to increase, self-heating floor from development to

maturity and then put on the market, warm home floor share a pleasant moment of life.

How to deal with Self-heating floors in the face of all kinds of heating.

In terms of Consumers' trend, the ground-heating flooring is the first choice for most

people,basically, using ground heating to go through the whole winte. In order to prevent

cracking of the floor, warped, etc., we need to have strict control of the surface

temperature which should not be over 30 ℃. Humidity control is also extremely

important, as we all know, once the ground temperature rises, the moisture content of

the hardwood flooring will reduce and lead to shrinkage cracks when it is exposed to

heat. To prevent the occurrence of such thing, it is recommended to increase the idoor

humidity appropriately. Waxing wood flooring is also a good option, to keep the moisture

content inside r and reduce the extent of expansion.

Of course, there are many ways to increase the indoor humidity, you can use a humidifier

to humidify.If there is no humidifier, pls use a dry cotton mop to wipe the floor can also

play a good effect. In order to keep a relatively stable environment for the wood

flooring, you should ensure that the indoor humidity above 50%.

After controling the temperature and humidity, you should avod stuffing too many things

and legless furniture on it, so as not to affect the heating of the floors. At the same time, pls

do not place foam or plastic products on the floor, such items after long-term contact with

heating, may produce harmful gases which are bad for health.

Enjoy the better home life but also the environmental lifestyle.

What if the wood floorings get damp? How to deal with this problem?

In every rainy seasons, floorings are easy to get damp, especially wood floorings. If the

floorings become damp seriouly, they would muster. The life span would reduce greatly.

Therefore, we should take prompt action to avoid moisture.

Reasons why wood floorings get damp

1. humidity indoor are large in rainy days
2. the rooms are closed and unventilated
3. the quality are poor; installations are unreasonable
4. wooden materials are easy to absorb water

Solutions to wood flooring dampness

1. close the window in rainy days, while add ventilation in sunny days. As in rainy days, humidity outdoor is large. We should prevent moisture to invade in the rooms. In sunny days, ventilation is beneficial to evaporate.
2. Economically permitted, we could use dehumidifiers.
3. Open the air-conditioner, change to dehumidifying mode.
4. Use the drier to dilute moisture.
5. Normally, many families use old newspapers or cardboard. This    method has proved to be rewarding.

We would all meet the problem of hardwood flooring dampness. We hope we can help

you to solve the problem. If you have better idea, you can contact us.

Floor maintenance: floor lacquer is the "face"

Good wood flooring care and maintenance lead a healthy life, good care for

consumerslaying wood flooring is an essential step. And first we must take care of the

lacquer surface of the floor, as the floor "face" plays an important role, in addition to show

the external appearance of the floor better, but also to show the charm of delicate beauty

of brand. But as the lacquer is different, maintenance methods are not the same.

First we begin with a wide paint and lacquer flooring, as the higher class of these two

lacquer coatings, its effectiveness is also very significant not only has good water

resistance, high temperature resistant performance, and has a gradient of natural features,

the color gradually turn from deep to light. But it is noteworthy that don’t use low-

temperature water to clean regularly.

The polyurethane painted flooring has a strong temperature resistance, corrosion

resistance and acid resistance and other characteristics. Generally it needs to bemaintained

every several months or half yearby using wax, usually in the course, using a soft towel or

cotton to erase the dust. But not water, avoid to wipe the liposomes on the surface, which

reduce the surface gloss.

Flooring lacquer is the "face" of hardwood flooring, everyone in daily life should be easy to

find the hardwood flooring becomes very old after a long use, maintain the gloss

lacquered flooring should be timely, so maintenance is no doubt the way to keep your

flooring eternal youth, but also extend the life of flooring.

Good flooring, good face, you deserve!

How to get rid of foot sounds on wood flooring?

In some family, after home decoration, the wood floorings would produce sounds more or

less when walking on them. Therefore, what is the reasons that result in the sounds?

In fact,  under heating system and wood floorings are closely related with each other. We

should observe how the sounds are produced. If we tread on one place, it makes a sound,

tread again, and sound again continuously, then we could sure that theunder heating

system and the mortise are not fixed enough, or the mortise materials are too short, so

that the under heating system could rope them. There are few approaches that can deal

with the problems. Even though we can relieve them, we could not get rid of the roots.

There is only one method. We should refix the under heating system and reinstall the wood floorings,

which is troubling. Everyone is unwilling to do that.

Only pay attention to these technics and approaches before installation can we avoid the

sounds.

1  Before installing the under heating system, we usually use 12mm hammer to drill the

holes.

2  Then the mortise should be a square that is 18 to 20mm or more. We can not easily drill

the holes. Otherwise, the mortise shrink in a few days.

3  Wooden tongue rammed earth material is harder than under heating system material,

then the hard wood contractile force is small. The under heating system is not easy to pull

up, so that we could maintain the stability.

4  In some room, the ground level height has several centimeters difference. In this time,

carpenters would mat some knife-shaped cork and plywood to make sure the  under

heating  systems are flat. But we should not forget that if we mat the under heating system

more than 2.5 centimeters, we should fix the short under heating systems each other to

prevent wobbling and ensure the flatness.

5  When drilling hardwood floorings, the aperture should be less than the flooring nails.

Only do that can the wood floorings fix better.

6  The surroundings of the walls should preserve 1 centimeter or more shrinkage gap to

avoid expansion due to climate change and moisture content.

Small details would finally influence the quality of   hardwood floorings. Please take care of

installation details!

Explanation on the structures and surface technics of laminate flooring

When people are choosing laminate flooring, it is undoubtably that we would consider the

 base  material. Then, the surface technics are also very important which influence the  

wearness of laminate wood floorings directly. Today, we will tell you the structure and 

surface technics of laminate wood floorings to help consumers have a better understanding 

of them.

At first, we will give you a brief introduction of the structure of laminate wood floorings. 

From the bottom up, they are balance layer, base material layer, decoration layer, wear-

resisting layer. The so-called surface technics is wear-resisting technics.

For texture, we have aluminium oxide, melamine, and piano lacquer.

Standardized laminate wood floorings should have aluminium oxide wear-resisting paper. 

They are 46g, 38g, 33g or lower. Our country has stipulated that the wear –resistance of 

the surface of laminate wood floorings should be more than 6000 stroll. Only the 46g 

wear- resistance paper can ensure that requirement.

Melamine coatings are used in wallboard, desk etc which do not require high wear 

resistance. In the flooring industry, we call it ‘false floors’. Its wear-resistance stroll is only 

300-500. If we use it as wood floors at a great intensity, two or three months can tear the decoration 

paper. However, standardized laminate floorings can normally use 10 to 20 years and will not have 

these problems. This kind of floor does not have wear-resistance on the surface. It looks clear, good, and 

feels soft. That is why outsiders are easy to be cheated.

Piano lacquer coating is in fact the coating on the hardwood floorings.

From the characteristics on the surface, we can also divided into embossed surface and 

crystal surface.

  1  Crystal surface are lustrous, smooth, wear-resisting and easy to take care of.

  2  Embossed surface has no distinction with crystal surface from the positive surface. But 

from the negative surface, we can feel the wood grain shape pattern. Embossed surface are 

personalized and beautiful, but if we use the same weight wear-resistance paper, the 

wearness of crystal surface is higher.

lacquered wood floorings better or natural oiled wood floorings ?

In China, wood flooring companies often paint the surface when processing. However,

European companies like to use natural oil painting. Why?

First, it is the matter of aesthetics. In early times, people think that wood floorings with

good luster, smoothness, hardness and strong painting surface are favorable. Later, they

discovered antique floorings, which makes advancement in aesthetics. Nevertheless,

foreigners think that feelings are very important. You can take off you shoes and have a

try. You would find that the feeling of bare foot on flat floors and natural oil floors are

different. Paint film floors are sticky, while natural oil floors are more comfortable and

natural, especially in summer. Nowadays, some of the companies in our country began to

learn European enterprises. They use natural oil to paint the surface. This kind of wood

floorings feel beautiful and soft.

Second, it is the matter of wood flooring management. In the eyes of most people, the

lacquered surface is better to manage than the natural oil surface. Really? In fact,

foreigners have gone through this problems. No matter how well we paint the wood

floorings, after few years frition, the wood floorings would have more and more scratches.

With time go by, you would feel worse and worse so that you would like to replace them.

But it consumes much energy to replace the  hardwood floorings. Then can you imagine how the

foreigners would do? They would clean the floors well, find several pieces of sandpapers,

and sand them. Then they brush some natural oil. One or two days later, you would find it

more tasteful. Although ten years have past, there would be no place that is damaged. You

only to find it more antique. However, paint surface can not do this.

Third, it is the matter of environmental concept. To sum up, UV painting is environmental.

It can reach country’s standard. But it does not mean there is no toxic content inside. It

just contains a little. We have to see what paint you would use. On the other hand, natural

oil is distilled from plants. Pure natural oil does no harm to people. Surely, in order to

reduce cost, some people add some chemical products into it. As long as you smell it, you

would feel tense.

The installation of natural oiled hardwood floorings is simple. Thus, the production cost is lower than

paint. But we have to pay attention to the quality of natural oil. So far, people have a simple

understanding on natural oiled hardwood flooring
s. Merchants have to guide them. Maybe some special

group are suitable to this concept. We believe that in the future, more and more people

would accept it. It is a trend.